|
|
|
|
| You are here :everlast4steel.com ---> Safety ---> M.S.D.S. FIX-IT |
11/28/08
MATERIAL SAFETY DATA SHEET Page 01 of 07
|-------------------------------------------------------|
| M A T E R I A L S A F E T Y D A T A S H E E T |
|-------------------------------------------------------|
|=========================================================================|
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|=========================================================================|
PRODUCT NAME : FIX-IT
IDENTIFICATION NUMBER: 35671, 35672, 35673
PRODUCT USE/CLASS : Bonding Agent
MANUFACTURER:
MADE IN EU by POLYOXETANE LTD
Essex CM9 6TA , United Kingdom
WORLDWIDE 24 HRS INFO SERVICE AND EMERGENCY TELEPHONE:
UMCO Umweltconsult GmbH, 21087 Hamburg , Germany
Phone + 49 40 41 92 13 77 (24 hrs)
Fax + 49 40 41 92 13 57
PREPARER: Safety Health & Regulatory Affairs PREPARE DATE: 11/28/08
|=========================================================================|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|=========================================================================|
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER LESS THAN
---------------------------------------------------------------------------
01 Isopropanol 67-63-7 85.0-90.0
02 Resinpolymer - 3.0-5.0
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 500 mg/m3 1000 mg/m3 500 mg/m3 N/E N.E. NO
(See Section 16 for abbreviation legend)
|=========================================================================|
| SECTION 3 - HAZARDS IDENTIFICATION |
|=========================================================================|
EMERGENCY OVERVIEW: This health hazard information is based on information
on similar products.
Low toxicity under normal conditions of handling and use.
POLYOXETANE LTD 11/28/08
MATERIAL SAFETY DATA SHEET Page 02 of 07
Item No.: 35673
ACUTE EFFECTS - EYE CONTACT: In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice
|=========================================================================|
| SECTION 3 - HAZARDS IDENTIFICATION |
|=========================================================================|
ACUTE EFFECTS - SKIN CONTACT: . Prolonged skin contact may cause dermatitis.
ACUTE EFFECTS - INHALATION: Vapors and/or aerosols which may be formed at
elevated temperatures may be irritating.
CHRONIC OVEREXPOSURE EFFECTS: N.A.
OTHER INFORMATION: HMSIS Hazard Ratings: Health-1,Flammability-2,
Chemical Reaktivity-0
NFPA Hazard Ratings : Health-1,Flammability-2,
Instability-0
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT, INHALATION, EYE CONTACT
|=========================================================================|
| SECTION 4 - FIRST AID MEASURES |
|=========================================================================|
EYE CONTACT: In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
SKIN CONTACT: Remove contaminated clothing. Wash skin with soap and
water. Get medical attention if symptons occur.
INHALATION: If symptoms occur, remove to fresh air. Seek medical attention
if symptoms persist.
INGESTION: Swallowing less than an ounce will not cause significant harm.
POLYOXETANE LTD 11/28/08
MATERIAL SAFETY DATA SHEET Page 03 of 07
Item No.: 35673
|=========================================================================|
| SECTION 5 - FIRE FIGHTING MEASURES |
|=========================================================================|
FLASH POINT: 12 Celsius 54 F LOWER EXPLOSIVE LIMIT: 2.1 Vol%
(PENSKY-MARTENS C.C.) UPPER EXPLOSIVE LIMIT:12.0 Vol%
AUTOIGNITION TEMPERATURE: 425 Celsius 797 F
EXTINGUISHING MEDIA: USE WATER SPRAY,DRY CHEMICAL,CARBON DIOXIDE (CO2),FOAM
SPECIAL FIREFIGHTING PROCEDURES: Use NIOSH-approved self-contained
breathing apparatus and full protective clothing. Use water to cool
exposed containers. .
|=========================================================================|
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
|=========================================================================|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Collect large
spills mechanically or with liuid absorb material and transfer waste to a
leakproof container.Remove all sources of ignition. Don´t use a vakuum
cleaner.
|=========================================================================|
| SECTION 7 - HANDLING AND STORAGE |
|=========================================================================|
HANDLING: Follow all MSDS/label precautions even after container is
emptied because it may retain product residues. FOR INDUSTRIAL USE ONLY.
STORAGE: KEEP OUT OF THE REACH OF CHILDREN.
POLYOXETANE LTD 11/28/08
MATERIAL SAFETY DATA SHEET Page 04 of 07
Item No.: 35673
|=========================================================================|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|=========================================================================|
ENGINEERING CONTROLS: General ventilation usually adequate. Local exhaust
as needed to control vapor or dust levels to below lowest component TLV.
RESPIRATORY PROTECTION: None normally required under general ventilation.
If TLV/PEL is exceeded, if use is performed in a poorly-ventilated space,
or if inhalation effects occur, use NIOSH-approved vapor cartridge
===========================================================================
|=========================================================================|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|=========================================================================|
respirator in accordance with applicable health and safety regulations and
manufacturer's recommendations.
SKIN PROTECTION: Clean clothing to cover skin. Saranex gloves. Butyl
rubber gloves. Neoprene gloves. Nitrile gloves. PVA gloves.
EYE PROTECTION: Chemical splash goggles.
OTHER PROTECTIVE EQUIPMENT: Accessible eye wash and safety shower.
HYGIENIC PRACTICES: Follow good general industrial safety practices during
use. Do not smoke or eat during use. DO NOT reuse empty containers
without commercial clean or recondition. Follow all MSDS/label precautions
even after container is emptied.
|=========================================================================|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|=========================================================================|
BOILING RANGE : (180F)82Celsius VAPOR DENSITY : Is heavier than air
ODOR : Mild alcohol ODOR THRESHOLD : No data
APPEARANCE : water white EVAPORATION RATE: Is faster than Butyl
SOLUBILITY IN H2O : Negligible Acetate
FREEZE POINT : No data SPECIFIC GRAVITY: 0.78
VAPOR PRESSURE : No data pH @ 0.0 % : N/A
PHYSICAL STATE : Liquid VISCOSITY : low
FLASH-POINT : 12 deg Centigrade
COEFFICIENT OF WATER/OIL DISTRIBUTION: No data
(See Section 16 for abbreviation legend)
|=========================================================================|
| SECTION 10 - STABILITY AND REACTIVITY |
|=========================================================================|
CONDITIONS TO AVOID: Keep away from strong oxidizing agents.
INCOMPATIBILITY: Strong oxidants.
POLYOXETANE LTD 11/28/08
MATERIAL SAFETY DATA SHEET Page 05 of 07
Item No.: 35673
HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
|=========================================================================|
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
|=========================================================================|
COMPONENT TOXICOLOGICAL INFORMATION:
----------- CHEMICAL NAME ----------- ------ LD50 ------ ------ LC50 ------
Propanol-2 Oral-rat 4.0 g/kg 4.0 g/kg (Mouse)
Resinpolymer Not Applicable Not Applicable
This health hazard assessment is based on information available on similar
products.
===========================================================================
|=========================================================================|
| SECTION 12 - ECOLOGICAL INFORMATION |
|=========================================================================|
ECOLOGICAL TEST DATA: Not Applicable.
The product is essntial soluble in water. WGK 2 (self classification)
The product is anticipated to be fully removed in biological treatment
processes.
|=========================================================================|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|=========================================================================|
DISPOSAL METHOD:dispose material in accordance with local, state and
federal regulations.
|=========================================================================|
| TRANSPORTATION INFORMATION |
|=========================================================================|
DOT PROPER SHIPPING NAME: Resin Solution U.N. No. 1866
DOT TECHNICAL NAME: Resin Solution
DOT HAZARD CLASS: N/A HAZARD SUBCLASS: NA
DOT UN/NA NUMBER: N/A PACKING GROUP: II RESP. GUIDE PAGE:
INTERNATIONAL SHIPPING NAME: Resin Solution U.N. No. 1866
INTERNATIONAL ID NUMBER: 3.2/1866/II
IMDG CLASS (1Û,2Û): N/A IMDG PAGE NUMBER: 3244
IMDG EMS: 3.06 IATA CLASS (1Û,2Û): N/A
POLYOXETANE LTD 11/28/08
MATERIAL SAFETY DATA SHEET Page 06 of 07
Item No.: 35673
ADR ITEM NO.: 3/1A ADR TREMCARD: 3/1A
SUPPLEMENTAL INFORMATION: Not Applicable.
|=========================================================================|
| SECTION 15 - REGULATORY INFORMATION |
|=========================================================================|
EEC classification according to EEC-rules:
HAZARD SYMBOL :-
RISK PHRASES : R 11 (highly flammable)
R 36-67 (irritating to the eyes and to the respiratory
system)
Safety phrases : S7-16 ( keep container tightly closed andaway from sources
of ignition-no smoking )
S 24-25 ( avoid contact with skin and the eyes )
S 26 (In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice)
CALIFORNIA PROPOSITION 65:
WARNING: This product contains no chemical(s) known to the State of
California to cause cancer.
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
COMPONENT RCRA CLASSIFICATIONS: Not regulated
COMPONENT RCRA CODES: Not Applicable.
POLYOXETANE LTD 11/28/08
MATERIAL SAFETY DATA SHEET Page 07 of 07
Item No.: 35673
CERCLA RQ VALUE (MINIMUM): None known
|=========================================================================|
| SECTION 16 - OTHER INFORMATION |
|=========================================================================|
HMIS RATINGS - HEALTH: 1 FLAMMABILITY: 2 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: -
REASON FOR REVISION: new format
VOLATILE ORGANIC COMPOUNDS (VOCS): N.A.
LEGEND: N.A. - Not Applicable, N.E. - Not Established,
N.D. - Not Determined
ABBREVIATIONS: ACGIH = American Conference of Governmental Industrial
Hygienists; OSHA = US Occupational Health and Safety Administration; UK =
United Kingdom; TLV-TWA = Threshold Limit Value-Time Weighted Average (8
hrs); STEL = Short-Term Exposure Limit (15 min); C = Ceiling Value; PEL =
Permissible Exposure Limit
===========================================================================
The information contained in this MSDS was obtained from current and reliable sources, however, the
data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy.
Since the conditions or handling, storage and disposal of this product are beyond the control of
POLYOXETANE LTD. POLYOXETANE LTD will not be responsible
for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred,
regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS.
Various government agencies may have specific regulations regarding the transportation, handling,
storage, use, or disposal of this product which may not be covered by this MSDS.
The user is responsible for full compliance.